Abrasion Wear PET Tactile Membrane Switch Light Weight 0 ～ 30V DC
foundations white, blue, green, blue, green, etc
1200 * 5000 can be spliced (mm)
EL Power Source
AC-DC can be
In need of special light sources (eg: no shadows, no dizzying,
brightness uniformity and neon effect ......), in with the
environment needs (eg: a narrow space, complex shapes, temperature
and power consumption constraints, vibration under the environment
......), the illusion is impossible to make up the traditional cold
In addition, for printed mark, instructions, election propaganda,
body decoration and interior design, photo or text on backlit
transparent advertising material, EL cold light is the best light
EL Specifications Feature Description:
1. Cool Works is a converted electrical energy, cold light source
general operating voltage and frequency operating voltage can be
adjusted after AC40V ~ AC220V, while the operating frequency can be
50 Hz to 4000 Hz, increasing the voltage will increase luminescence
brightness, if the increase in frequency can increase the
brightness, color and feel cold light blue.
2. EL cold light of life is not like traditional light sources have
the sudden demise of the phenomenon, but after a long period of
use, the brightness will gradually decreasing cold, voltage,
frequency, temperature, moisture, cold light of life are affected
3. The luminescent brightness of luminescent brightness can be
obtained by photometric measurement, the luminance of the
luminescent light source is usually expressed in units of
photometric calculation, but the human eye is less easy to achieve
such sensitivity, visual sense and generally photometer the
standard of comparison, there will be a certain degree of error.
4. EL cold light source to produce power source, via a matching
transformer inverter design (DRIVER) to drive, and the drive
voltage and frequency of cold tablets, is consideration of the size
of the area in accordance with rays, use of the environment, life,
etc. conditions for supporting the design and development and
production of professional production.
5. Cold light weight and thickness of cold tablets have a very
attractive main condition is that the weight of its weight and
thickness, cold tablets is 0.1 grams per square centimeter, and the
thickness is 0.2mm ~ 0.5mm, the special requirements for some
orders , weight and thickness of the luminescent film will be
followed by change.
6. Another advantage of cold tablets bending toughness cold tablets
is that it has good flexibility, usually 2cm above bending radius
is acceptable, this bending toughness characteristics, but also
gives a cold tablets have more different environments purposes.
7. The sealed edges of cold tablets in the week along the famous
Flashing should be at least 0.1cm package, narrow luminescence
lifetime package would produce subtle changes, it is proposed
should be kept sealed properly basic width.
8. EL cold light emitting principle principle glowing EL sheet is
the material layer converts electrical energy into light
The main technical parameterS
1.Contact resistance: ＜1Ω /cm
2.Insulation resistance: ＜100MΩ (250V DC)
3.operating voltage: ≤ 50VDC
4.working current: 25- 100mA,0-30V DC
5.reliability, service life:＜1 million times
6.operating temperature: -40 ℃ ~ +70 ℃
8.spring time: ≤ 5ms
9.substrate voltage: 2000V DC
10.Tail flexiblility:any angle within 180 degree
1. The backlight applications: all kinds of electric computers,
laptops, handheld game consoles, telephones, electronic organizers,
electronic dictionaries, audio equipment, control panels, microwave
oven control panel, fax machines, copiers, watches etc.
2. Automotive: Car instrument panel, warning lights, vehicle
exteriors, decorative door bar, third brake light etc.
3. Architecture and interior applications: elevator floor marking,
labeling instructions escape, decorative wall lights, night
landscape decorative building, interior decorating
4. Safety, lifesaving: Night police, traffic police wearing cold
warning clothing, safety signs at night, lifesaving instructions,
ships, docks, etc.
5. Military and aerospace applications: military map backlighting,
backlit instruments, airport runways at night riverboat
instructions nighttime identification instructions, ground guide
6. Promotional items: merchandising, application of the campaign
trail, election propaganda, fleet campaign, advertising brochures
7. Toys, gifts: all kinds of toys, light source, light frame, EL
photo, Valentine's cards, badges and other consumer product
8. Public places of business equipment, machinery: bus stop, public
phone booths, coin-drinks machine on the bus route licensing etc.